Red Oxide Shop Coat Metal Primer is a solvent-based alkyd specially formulated for shop environments. It is designed to provide corrosion protection during project fabrication and storage. It is easy to apply, spreads evenly, resists sagging, has excellent adhesion qualities, resists oils, salt air, and mild chemical fumes. For Interior & Exterior Uses!

Gray Alkyd Shop Coat Metal Primer is a solvent-based alkyd specially formulated for shop environments. It is designed to provide corrosion protection during project fabrication and storage. It is easy to apply, spreads evenly, resists sagging, has excellent adhesion qualities, resists oils, salt air, and mild chemical fumes. For Interior & Exterior uses!

Infiniti’s 100% Acrylic Alkali Resistant Masonry Primer is a 100% acrylic primer specially formulated to resist “alkali burn” commonly associated with new cementitious substrates. Its special formulation provides excellent coverage, adhesion, low odor, and may be applied to surfaces with a PH level as high as 11. It dries fast, is mildew resistant, is non-yellowing, and has excellent priming and sealing properties. May be top-coated with both water and alkyd/oil-based finish coatings.

Alkali Resistant White 100% Acrylic Primer-Sealer is an acrylic emulsion primer sealer specifically designed to bind oxidized paint residue - (chalk), as well as other forms of small particles of foreign debris to the substrate. Easy to apply, it provides excellent adhesion and its special formulation penetrates and seals bare masonry surfaces allowing specified paint coatings to be applied more smoothly.

Alkali Resistant Clear 100% Acrylic Primer-Sealer is an acrylic emulsion primer sealer specifically designed to bind oxidized paint residue - (chalk), as well as other forms of small particles of foreign debris to the substrate. Easy to apply, it provides excellent adhesion and its special formulation penetrates and seals bare masonry surfaces allowing specified paint coatings to be applied more smoothly.

Acrylic Surface Conditioner 100% Acrylic Clear Primer-Sealer is an acrylic emulsion primer sealer specifically designed to bind oxidized paint residue - (chalk), as well as other forms of small particles of foreign debris to the substrate. Easy to apply, it provides excellent adhesion and its special formulation penetrates and seals bare masonry surfaces allowing specified paint coatings to be applied more smoothly.

Chalk-Bond + Clear 100% Acrylic Primer-Sealer Concentrate is a water reducible acrylic emulsion primer sealer specifically designed to bind oxidized paint residue - (chalk), as well as other forms of small particles of foreign debris to the substrate. Easy to apply, it provides excellent adhesion and its special formulation penetrates and seals bare masonry surfaces allowing specified paint coatings to be applied more smoothly. Concentrated - 1 gallon makes 4 gallons mixed!

Metal Roof Primer is a specially formulated 100% acrylic primer specifically designed for application to a variety of metal surfaces, as well as other paintable surfaces. It provides excellent coverage, adhesion and durability, and is easy to apply. It is mildew and algae resistant, offers excellent rust resistance, and is low VOC.

Stone Age Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich "Wet Look" finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents.

Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces.

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

Stone Age High Solids Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich "Wet Look" finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents.

NOTE: Not recommended as a re-seal on previously sealed surfaces. For re-seal type applications, it is recommended to use Infiniti’s #255, Stone Age Re-Seal Brick Paver & Concrete Sealer.

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

Stone Age Re-Seal Brick Paver & Concrete Sealer is a specially formulated solvent borne acrylic sealer designed for application to previously sealed brick pavers and cementitious substrates which have faded or lost their luster over time. Formulated to penetrate and re-seal, it enhances the pavers to give them that same rich "Wet Look" finish. It provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents. For Exterior Use Only!

Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces.

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

Stone Age Concrete Stain is a durable concrete stain that, when properly applied, penetrates deep into the cementitious substrate to seal and waterproof the surface. It is fast drying, provides superior wear resistance, weatherability and protects the surface from excessive powdering, staining and water intrusion. It applies easily and may be applied over existing concrete stains and sealers. Not recommended for previously painted surfaces. COLORS: White, Clear, Deeptone & Ultra-Deeptone Tint Bases, and 10 Stock Colors.

Special Note: When applying lighter colors to driveways, carport and garage floors, tire tracking may occur. Finish may become slippery when wet. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid Additive, is recommended to enhance anti-slip safety.

Level 5 Latex Drywall Surfacer is a specially formulated drywall primer/surfacer specifically designed to provide a "Level 5" smooth primer finish of approximately 10 - 15 mils dry film thickness - (DFT) to interior walls creating a smooth surface for the application of recommended finish coatings. Easy to use, it provides excellent sealing properties, coverage, helps hide or minimize surface imperfections, is self leveling, and promotes excellent sanding properties. For Interior Use Only!

Stone Age WB Bonding Surfacer is a specially formulated modified waterborne epoxy ester sealer / surfacer designed for use on porous and some non-porous concrete substrates, such as garage and carport floors. It reinforces and penetrates the surface, thus promoting adhesion characteristics and providing a more compatible surface for the application of various latex and solvent-based floor coatings. For Interior & Exterior Use!

ATS-13C 100% Acrylic Clear Roof Tile Sealant is a premium quality acrylic emulsion clear sealer/finish that penetrates and bonds to a variety of roofing substrates, including asphalt shingles. It also demonstrates excellent adhesion to ATS-13 100% Acrylic Pigmented Roof Tile Sealant, as well as other properly prepared, previously painted surfaces. It provides an attractive satin-gloss that resists dirt, cracking, chipping, mildew, algae, alkali, is non-yellowing, low VOC, and provides excellent product versatility and is easy to apply.

100% Acrylic Clear Roof Shingle Sealer is a premium quality acrylic emulsion clear sealer/finish that penetrates and bonds to a variety of roofing substrates, including asphalt shingles. It provides an attractive satin-gloss that resists dirt, cracking, chipping, mildew, algae, alkali, is non-yellowing, low VOC, and provides excellent product versatility and is easy to apply.

Infiniti’s Great White Acrylic Resin Primer is a polymer emulsion resin is intended as a general purpose primer and is recommended as a bleed-blocking primer for Great White Silicone Roof Coatings. Its light yellow color changes to a darker amber hue as the coating dries. This allows for visual confirmation of the coating’s level of cure and readiness for application of the top coatings.