Is a specially formulated 100% acid free masonry cleaner and efflorescence remover. It is not only the world's strongest masonry cleaner, it is also the safest. Independent test confirms that its synthetic acid formula dissolves more calcium carbonate and efflorescence than muriatic, (hydrochloric) or phosphoric acid base cleaners, which are also harmful. It will safely and quickly clean pavers, brick, concrete, river rock, architectural concrete and retainer walls while dissolving all signs efflorescence. It is color safe, non-fuming and is safe for use in and around food processing and equipment areas. It is 100% biodegradable, water soluble, non-flammable, non-toxic and easy to use.

Stone Age Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich "Wet Look" finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents.

Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces.

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

A one-part, color-enhancing, waterborne protective coating for concrete pavers, clay tiles, clay pavers, barrel roof tiles, slate, etc. It is manufactured using a highly durable low VOC urethane polymer. This new resin technology enables the pavers to be sealed while still damp! It has been formulated for maximum water blush (haze) resistance and given a satin/semi-gloss appearance. Additional applications will increase sheen level.

Infiniti’s Stone Age High Def WB High Solids “Wet Look” Finish is a VOC compliant, high solids one-part water-borne polymer protective coating design for application to a variety masonry surfaces, such as, concrete pavers, barrel roof tiles, slate, etc. This color enhancing clear contains “UV” inhibitors to protect surfaces from harmful ultra-violet rays of the sun while providing a satin/semi-gloss finish that penetrates the surface, seals, and strengthens and binds the sand between paver joints, thus limiting movement, and retarding the growth of weeds.FOR INTERIOR & EXTERIOR USE!

Stone Age High Solids Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich "Wet Look" finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents.

NOTE: Not recommended as a re-seal on previously sealed surfaces. For re-seal type applications, it is recommended to use Infiniti’s #255, Stone Age Re-Seal Brick Paver & Concrete Sealer.

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

Stone Age Re-Seal Brick Paver & Concrete Sealer is a specially formulated solvent borne acrylic sealer designed for application to previously sealed brick pavers and cementitious substrates which have faded or lost their luster over time. Formulated to penetrate and re-seal, it enhances the pavers to give them that same rich "Wet Look" finish. It provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents. For Exterior Use Only!

Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces.

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

Stone Age Concrete Stain is a durable concrete stain that, when properly applied, penetrates deep into the cementitious substrate to seal and waterproof the surface. It is fast drying, provides superior wear resistance, weatherability and protects the surface from excessive powdering, staining and water intrusion. It applies easily and may be applied over existing concrete stains and sealers. Not recommended for previously painted surfaces. COLORS: White, Clear, Deeptone & Ultra-Deeptone Tint Bases, and 10 Stock Colors.

Special Note: When applying lighter colors to driveways, carport and garage floors, tire tracking may occur. Finish may become slippery when wet. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid Additive, is recommended to enhance anti-slip safety.

Infiniti’s Stone Age 2K Fortress Waterborne Acrylic Urethane Clear is a high performance 2-part clear sealer and finish that delivers unparalleled protection for pavers, decorative concrete, floors, walkways and other painted surfaces. The hard crystal clear film will withstand heavy use from vehicles and commercial traffic. It is resistant to most solvents and chemicals. Enhances the color of pavers and decorative concrete, and will not yellow. Ideal for interior and exterior use.

Stone Age Walkway & Deck Coating is a premium quality 100% acrylic floor coating specially designed for application to properly prepared floor and deck surfaces. It provides a tough, durable low-sheen finish that resists chipping, peeling, fading, and is mildew resistant. Easy to apply, it offers excellent coverage, and may be applied to a variety of interior & exterior surfaces. COLORS: White/Pastel, Midtone, Deeptone & Ultra-Deeptone Tint Bases, and 10 Stock Colors.

NOTE: This finish may become slippery when wet when applied to horizontal surfaces, such as floors, patios, or any floor area exposed to moisture. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid to ensure an anti-slip, and safe walking environment is recommended.

Stone Age WB Bonding Surfacer is a specially formulated modified waterborne epoxy ester sealer / surfacer designed for use on porous and some non-porous concrete substrates, such as garage and carport floors. It reinforces and penetrates the surface, thus promoting adhesion characteristics and providing a more compatible surface for the application of various latex and solvent-based floor coatings. For Interior & Exterior Use!

Stone Age Driveway Coating is a special 100% acrylic waterborne coating specifically designed for application to properly prepared driveways, floors and walkways. Its special formulation provides excellent hardness, durability, and weather resistance. Its smooth low sheen finish resists cracking, peeling and chipping, is mildew resistant, applies easily, and may be applied to previously painted surfaces. For Interior & Exterior Use! COLORS: White/Pastel, Midtone, Deeptone & Ultra-Deeptone Tint Bases, and 11 Stock Colors.

NOTE: This finish may become slippery when wet. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid to ensure an anti-slip, and safe walking environment is recommended.

Stone Age Anti-Slip Floor Coating is a special 100% acrylic waterborne coating designed for application in areas where safety concerns are a priority. Its special formula provides an anti-slip texture finish that has excellent hardness and durability, which offers excellent wear and abrasion resistance in high foot traffic areas. Easy to apply, it has excellent coverage, resists cracking, chipping and peeling, is fade resistant, mildew resistant, and has excellent color retention.For Interior & Exterior Use! COLORS: White & 11 Stock Colors

Stone Age Non-Skid Paint Additive consists of state-of-the-art polyethylene granules specifically designed as a non-skid additive for all types of floor coatings. Its special formulation provides a more durable and safe non-skid surface for both interior and exterior floor surfaces. It will not alter the color and the overall performance of the product being used. Once added to the paint coating, these lightweight granules stay suspended much longer than traditional sand texture additives, and they don’t break-down as fast, thus offering better overall performance, durability, and product versatility. For Interior and Exterior use!