Primers & Sealers

Below is a list of our products in this category. To view the Material Safety Data Sheet or the Product Data Sheet, please click on the corresponding link.

#IP10-16 Red Oxide Alkyd Shop Coat Primer
IP-10-16

Red Oxide Shop Coat Metal Primer is a solvent-based alkyd specially formulated for shop environments. It is designed to provide corrosion protection during project fabrication and storage. It is easy to apply, spreads evenly, resists sagging, has excellent adhesion qualities, resists oils, salt air, and mild chemical fumes. For Interior & Exterior Uses!

  • Structural Steel
  • Ferrous Metal
  • Aluminum
  • Machinery
  • Metal Railings
  • Easy to Apply
  • Rust Inhibitive
  • Lead Free
  • Excellent Adhesion
  • Abrasion Resistant
#IP13-98 Gray Alkyd Shop Primer
IP-10-16

Gray Alkyd Shop Coat Metal Primer is a solvent-based alkyd specially formulated for shop environments. It is designed to provide corrosion protection during project fabrication and storage. It is easy to apply, spreads evenly, resists sagging, has excellent adhesion qualities, resists oils, salt air, and mild chemical fumes. For Interior & Exterior uses!

  • Structural Steel
  • Ferrous Metal
  • Aluminum
  • Machinery
  • Metal Railings
  • Easy to Apply
  • Rust Inhibitive
  • Lead Free
  • Excellent Adhesion
  • Abrasion Resistant
#IP192 Alkali Resisant White Primer For Hot Stucco

IP-192

Infiniti’s 100% Acrylic Alkali Resistant Masonry Primer is a 100% acrylic primer specially formulated to resist “alkali burn” commonly associated with new cementitious substrates. Its special formulation provides excellent coverage, adhesion, low odor, and may be applied to surfaces with a PH level as high as 11. It dries fast, is mildew resistant, is non-yellowing, and has excellent priming and sealing properties. May be top-coated with both water and alkyd/oil-based finish coatings.

  • 100% Acrylic Formula
  • Excellent Coverge
  • Primes & Seals
  • Bonds To Glossy Surfaces
  • Improves Adhesion
  • Sands Easiliy
  • Easy to Apply
  • Low VOC
#IP194 Alkali Resistant White Sealer For Hot Stucco
IP-194

Alkali Resistant White 100% Acrylic Primer-Sealer is an acrylic emulsion primer sealer specifically designed to bind oxidized paint residue - (chalk), as well as other forms of small particles of foreign debris to the substrate. Easy to apply, it provides excellent adhesion and its special formulation penetrates and seals bare masonry surfaces allowing specified paint coatings to be applied more smoothly.

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cement Block
  • Cement Board
  • Previously Painted Surfaces
  • Acrylic Formula
  • Excellent Adhesion
  • Promotes Finish Coat Adhesion
  • Reduces Surface Porosity
  • Low VOC
  • Excellent Product Versatility
  • Soap & Water Clean-Up
  • Alkali Resistant Formula
#IP196 Alkali Resistant Clear Sealer For Hot Stucco
IP-196

Alkali Resistant Clear 100% Acrylic Primer-Sealer is an acrylic emulsion primer sealer specifically designed to bind oxidized paint residue - (chalk), as well as other forms of small particles of foreign debris to the substrate. Easy to apply, it provides excellent adhesion and its special formulation penetrates and seals bare masonry surfaces allowing specified paint coatings to be applied more smoothly.

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cement Block
  • Cement Board
  • Previously Painted Surfaces
  • Acrylic Formula
  • Excellent Adhesion
  • Promotes Finish Coat Adhesion
  • Reduces Surface Porosity
  • Low VOC
  • Excellent Product Versatility
  • Soap & Water Clean-Up
  • Alkali Resistant Formula
#IP198 Acrylic Surface Conditioner
IP-198

Acrylic Surface Conditioner 100% Acrylic Clear Primer-Sealer is an acrylic emulsion primer sealer specifically designed to bind oxidized paint residue - (chalk), as well as other forms of small particles of foreign debris to the substrate. Easy to apply, it provides excellent adhesion and its special formulation penetrates and seals bare masonry surfaces allowing specified paint coatings to be applied more smoothly.

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cement Block
  • Cement Board
  • Previously Painted Surfaces
  • Acrylic Formula
  • Excellent Adhesion
  • Promotes Finish Coat Adhesion
  • Reduces Surface Porosity
  • Low VOC
  • Excellent Product Versatility
  • Soap & Water Clean-Up
#IP204 Chalk-Bond Plus Primer/Sealer (3-1 Concentrate)
IP-204

Chalk-Bond + Clear 100% Acrylic Primer-Sealer Concentrate is a water reducible acrylic emulsion primer sealer specifically designed to bind oxidized paint residue - (chalk), as well as other forms of small particles of foreign debris to the substrate. Easy to apply, it provides excellent adhesion and its special formulation penetrates and seals bare masonry surfaces allowing specified paint coatings to be applied more smoothly. Concentrated - 1 gallon makes 4 gallons mixed!

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cement Block
  • Cement Board
  • Previously Painted Surfaces
  • Acrylic Formula
  • Excellent Adhesion
  • Promotes Finish Coat Adhesion
  • Reduces Surface Porosity
  • Low VOC
  • Excellent Product Versatility
  • Soap & Water Clean-Up
#IP205 Acrylic Metal Roof Primer
IP-205

Metal Roof Primer is a specially formulated 100% acrylic primer specifically designed for application to a variety of metal surfaces, as well as other paintable surfaces. It provides excellent coverage, adhesion and durability, and is easy to apply. It is mildew and algae resistant, offers excellent rust resistance, and is low VOC.

  • Masonry
  • Stucco
  • Concrete
  • Brick
  • Cement Block
  • Cement Board
  • Previously Painted Surfaces
  • Acrylic Formula
  • Excellent Adhesion
  • Promotes Finish Coat Adhesion
  • Reduces Surface Porosity
  • Low VOC
  • Excellent Product Versatility
  • Soap & Water Clean-Up
#IP250 Stone Age Paver & Concrete Sealer (Original)
IP-250

Stone Age Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich "Wet Look" finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents.

 

Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces.

 

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

  • Brick Pavers
  • Stamped Concrete
  • Brick
  • Driveways
  • Decorative Stone
  • Floors
  • Concrete Chattahoochee
  • Garage Floors
  • Walkways
  • Patios
  • Excellent Penetration
  • Excellent Sealing
  • Waterproofs
  • Excellent Adhesion
  • Excellent Toughness & Durability
  • Resists Hot Tire Pick-Up
  • Resists Chemical Staining
  • Non-Yellowing
  • Resists UV Light
  • Easy To Apply
#IP252 Stone Age Paver & Concrete Sealer (High Solids)
IP-250

Stone Age High Solids Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich "Wet Look" finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents.

 

NOTE: Not recommended as a re-seal on previously sealed surfaces. For re-seal type applications, it is recommended to use Infiniti’s #255, Stone Age Re-Seal Brick Paver & Concrete Sealer.

 

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

  • Brick Pavers
  • Stamped Concrete
  • Brick
  • Driveways
  • Decorative Stone
  • Floors
  • Concrete Chattahoochee
  • Garage Floors
  • Walkways
  • Patios
  • Excellent Penetration
  • Sealing
  • Waterproofs
  • Excellent Adhesion
  • Excellent Toughness & Durability
  • Resists Hot Tire Pick-Up
  • Resists Chemical Staining
  • Non-Yellowing
  • Resists UV Light
  • Easy To Apply
#IP255 Stone Age Paver & Concrete Re-Sealer
IP-255

Stone Age Re-Seal Brick Paver & Concrete Sealer is a specially formulated solvent borne acrylic sealer designed for application to previously sealed brick pavers and cementitious substrates which have faded or lost their luster over time. Formulated to penetrate and re-seal, it enhances the pavers to give them that same rich "Wet Look" finish. It provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents. For Exterior Use Only!

 

Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces.

 

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

  • Brick Pavers
  • Stamped Concrete
  • Brick
  • Driveways
  • Decorative Stone
  • Floors
  • Concrete Chattahoochee
  • Garage Floors
  • Walkways and Patios
  • Excellent Penetration
  • Excellent Sealing
  • Excellent Adhesion
  • Excellent Toughness & Durability
  • Resists Hot Tire Pick-Up
  • Resists Chemical Staining
  • Non-Yellowing
  • Easy To Apply
#IP261 Stone Age Concrete Stain

IP-261

Stone Age Concrete Stain is a durable concrete stain that, when properly applied, penetrates deep into the cementitious substrate to seal and waterproof the surface. It is fast drying, provides superior wear resistance, weatherability and protects the surface from excessive powdering, staining and water intrusion. It applies easily and may be applied over existing concrete stains and sealers. Not recommended for previously painted surfaces. COLORS: White, Clear, Deeptone & Ultra-Deeptone Tint Bases, and 10 Stock Colors.

 

Special Note: When applying lighter colors to driveways, carport and garage floors, tire tracking may occur. Finish may become slippery when wet. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid Additive, is recommended to enhance anti-slip safety.

  • Patios
  • Walkways
  • Driveways
  • Garage Floors
  • Balconies
  • Pool Decks
  • Tennis Courts
  • Decorative Brick
  • Masonry Walls
  • Carports
  • Warehouse Floors
  • Solvent Acrylic Formula
  • Prevents Moisture Penetration
  • Resists Staining
  • Superior Wear Resistance
  • Superior Weather Resistance
  • Easy To Apply
#IP30 Level 5 Latex Drywall Surfacer
IP-30

Level 5 Latex Drywall Surfacer is a specially formulated drywall primer/surfacer specifically designed to provide a "Level 5" smooth primer finish of approximately 10 - 15 mils dry film thickness - (DFT) to interior walls creating a smooth surface for the application of recommended finish coatings. Easy to use, it provides excellent sealing properties, coverage, helps hide or minimize surface imperfections, is self leveling, and promotes excellent sanding properties. For Interior Use Only!

  • Acrylic Formula
  • Level 5 Finish
  • Hides Surface Imperfections
  • Self-Leveling
  • Excellent Sanding Properties
  • Easy To Apply
#IP44-50 Stone Age W/B Bonding Surfacer, Clear
IP-44-50

Stone Age WB Bonding Surfacer is a specially formulated modified waterborne epoxy ester sealer / surfacer designed for use on porous and some non-porous concrete substrates, such as garage and carport floors. It reinforces and penetrates the surface, thus promoting adhesion characteristics and providing a more compatible surface for the application of various latex and solvent-based floor coatings. For Interior & Exterior Use!

  • Garage & Carports
  • Patios
  • Balconies
  • Catwalks
  • Sidewalks
  • Driveways
  • Poured Concrete
  • Brick
  • Previously Painted Surfaces
  • Waterborne Epoxy Ester Formula
  • Excellent Surface Penetration
  • Applies To Non-Porous Surfaces
  • Seals Chalky Surfaces
  • Improves Adhesion Qualities
  • Eliminates Muriatic Acid Etching
  • Easy To Apply
#IP554 ATS-13 100% Acrylic Roof Tile Clear Sealant
IP-554

ATS-13C 100% Acrylic Clear Roof Tile Sealant is a premium quality acrylic emulsion clear sealer/finish that penetrates and bonds to a variety of roofing substrates, including asphalt shingles. It also demonstrates excellent adhesion to ATS-13 100% Acrylic Pigmented Roof Tile Sealant, as well as other properly prepared, previously painted surfaces. It provides an attractive satin-gloss that resists dirt, cracking, chipping, mildew, algae, alkali, is non-yellowing, low VOC, and provides excellent product versatility and is easy to apply.

  • 100% Acrylic Formula
  • Excellent Durability & Adhesion
  • Mildew & Algae Resistant
  • Alkali Resistant
  • Resists Cracking & Chipping
  • Low VOC
  • Non-Yellowing
  • Soap & Water Clean-Up
  • Easy To Apply
  • COLORS: Clear
#IP565 100% Acrylic Roof Shingle Sealer
IP-565

100% Acrylic Clear Roof Shingle Sealer is a premium quality acrylic emulsion clear sealer/finish that penetrates and bonds to a variety of roofing substrates, including asphalt shingles. It provides an attractive satin-gloss that resists dirt, cracking, chipping, mildew, algae, alkali, is non-yellowing, low VOC, and provides excellent product versatility and is easy to apply.

  • 100% Acrylic Formula
  • Excellent Durability & Adhesion
  • Mildew & Algae Resistant
  • Alkali Resistant
  • Resists Cracking & Chipping
  • Low VOC
  • Non-Yellowing
  • Excellent Product Versatility
  • Soap & Water Clean-Up
  • Easy To Apply
Powered by Sigsiu.NET