Floor Coatings

Below is a list of our products in this category. To view the Material Safety Data Sheet or the Product Data Sheet, please click on the corresponding link.

#IP249 Masonry Cleaner & Efflorescence Remover

IP-220

Is a specially formulated 100% acid free masonry cleaner and efflorescence remover. It is not only the world's strongest masonry cleaner, it is also the safest. Independent test confirms that its synthetic acid formula dissolves more calcium carbonate and efflorescence than muriatic, (hydrochloric) or phosphoric acid base cleaners, which are also harmful. It will safely and quickly clean pavers, brick, concrete, river rock, architectural concrete and retainer walls while dissolving all signs efflorescence. It is color safe, non-fuming and is safe for use in and around food processing and equipment areas. It is 100% biodegradable, water soluble, non-flammable, non-toxic and easy to use.

  • 100% Acid Free Formula
  • Removes Efflorescence
  • Non-Corrosive
  • Stronger than Muriatic
  • Non-Fuming
  • Non-D.O.T Regulated
  • 100% Biodegradable
  • Safe on Glass
  • Safe on Plants & Skin
  • Non-Toxic
#IP250 Stone Age Paver & Concrete Sealer (Original)
IP-250

Stone Age Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich "Wet Look" finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents.

 

Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces.

 

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

  • Brick Pavers
  • Stamped Concrete
  • Brick
  • Driveways
  • Decorative Stone
  • Floors
  • Concrete Chattahoochee
  • Garage Floors
  • Walkways
  • Patios
  • Excellent Penetration
  • Excellent Sealing
  • Waterproofs
  • Excellent Adhesion
  • Excellent Toughness & Durability
  • Resists Hot Tire Pick-Up
  • Resists Chemical Staining
  • Non-Yellowing
  • Resists UV Light
  • Easy To Apply
#IP250WB Stone Age High Def WB Paver Sealer
IP-250

A VOC compliant, one-part water-borne polymer protective coating design for application to a variety masonry surfaces, such as, concrete pavers, barrel roof tiles, slate, etc. Formulated from new “Bio-Echo” plant polymers technologies, it enables the pavers to be sealed while still damp! It is formulated for maximum water blush, or haze resistance while providing a satin/semi-gloss finish that penetrates the surface, seals, and strengthens and binds the sand between paver joints, thus limiting movement, and retarding the growth of weeds.

  • Water-Borne Plant Polymer
  • Joint Stabilizer
  • Penetrates & Seals
  • Excellent Coverage
  • Excellent Durability
  • Enhances Color
  • Resists Chipping
  • Resists Cracking & Peeling
  • Smooth Satin Finish
  • Easy To Apply
#IP252 Stone Age Paver & Concrete Sealer (High Solids)
IP-250

Stone Age High Solids Brick Paver & Concrete Sealer is a premium quality, solvent borne acrylic sealer that is designed to penetrate and seal bare cementitious substrates. Its attractive gloss finish not only enhances and darkens unsealed pavers to give them a rich "Wet Look" finish, but also provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents.

 

NOTE: Not recommended as a re-seal on previously sealed surfaces. For re-seal type applications, it is recommended to use Infiniti’s #255, Stone Age Re-Seal Brick Paver & Concrete Sealer.

 

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

  • Brick Pavers
  • Stamped Concrete
  • Brick
  • Driveways
  • Decorative Stone
  • Floors
  • Concrete Chattahoochee
  • Garage Floors
  • Walkways
  • Patios
  • Excellent Penetration
  • Sealing
  • Waterproofs
  • Excellent Adhesion
  • Excellent Toughness & Durability
  • Resists Hot Tire Pick-Up
  • Resists Chemical Staining
  • Non-Yellowing
  • Resists UV Light
  • Easy To Apply
#IP255 Stone Age Paver & Concrete Re-Sealer
IP-255

Stone Age Re-Seal Brick Paver & Concrete Sealer is a specially formulated solvent borne acrylic sealer designed for application to previously sealed brick pavers and cementitious substrates which have faded or lost their luster over time. Formulated to penetrate and re-seal, it enhances the pavers to give them that same rich "Wet Look" finish. It provides a superior toughness and durability that protects against the penetration of moisture, oils, grease stains, and other damaging or discoloring agents. For Exterior Use Only!

 

Note: Do not use on Epoxy Chattahoochee or other solvent sensitive surfaces.

 

Caution: May not be compatible with all previously applied coatings. Apply a small test area to ensure product compatibility.

  • Brick Pavers
  • Stamped Concrete
  • Brick
  • Driveways
  • Decorative Stone
  • Floors
  • Concrete Chattahoochee
  • Garage Floors
  • Walkways and Patios
  • Excellent Penetration
  • Excellent Sealing
  • Excellent Adhesion
  • Excellent Toughness & Durability
  • Resists Hot Tire Pick-Up
  • Resists Chemical Staining
  • Non-Yellowing
  • Easy To Apply
#IP261 Stone Age Concrete Stain

IP-261

Stone Age Concrete Stain is a durable concrete stain that, when properly applied, penetrates deep into the cementitious substrate to seal and waterproof the surface. It is fast drying, provides superior wear resistance, weatherability and protects the surface from excessive powdering, staining and water intrusion. It applies easily and may be applied over existing concrete stains and sealers. Not recommended for previously painted surfaces. COLORS: White, Clear, Deeptone & Ultra-Deeptone Tint Bases, and 10 Stock Colors.

 

Special Note: When applying lighter colors to driveways, carport and garage floors, tire tracking may occur. Finish may become slippery when wet. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid Additive, is recommended to enhance anti-slip safety.

  • Patios
  • Walkways
  • Driveways
  • Garage Floors
  • Balconies
  • Pool Decks
  • Tennis Courts
  • Decorative Brick
  • Masonry Walls
  • Carports
  • Warehouse Floors
  • Solvent Acrylic Formula
  • Prevents Moisture Penetration
  • Resists Staining
  • Superior Wear Resistance
  • Superior Weather Resistance
  • Easy To Apply
#IP42-00 Stone Age Walkway & Deck Coating
IP-42-00

Stone Age Walkway & Deck Coating is a premium quality 100% acrylic floor coating specially designed for application to properly prepared floor and deck surfaces. It provides a tough, durable low-sheen finish that resists chipping, peeling, fading, and is mildew resistant. Easy to apply, it offers excellent coverage, and may be applied to a variety of interior & exterior surfaces. COLORS: White/Pastel, Midtone, Deeptone & Ultra-Deeptone Tint Bases, and 10 Stock Colors.

 

NOTE: This finish may become slippery when wet when applied to horizontal surfaces, such as floors, patios, or any floor area exposed to moisture. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid to ensure an anti-slip, and safe walking environment is recommended.

  • Sidewalks
  • Stairways
  • Patios
  • Balcony Decks
  • Pool Decks
  • Wood Decks
  • Concrete Floors
  • Warehouse Floors
  • Catwalks
  • Tennis Courts
  • Ramps & Loading Docks
  • 100% Acrylic Formula
  • Excellent Coverage
  • Excellent Toughness & Durability
  • Resists Chipping, Cracking & Peeling
  • Mildew Resistant
  • Smooth Low Sheen
  • Excellent Product Versatility
  • Easy To Apply
#IP44-50 Stone Age W/B Bonding Surfacer, Clear
IP-44-50

Stone Age WB Bonding Surfacer is a specially formulated modified waterborne epoxy ester sealer / surfacer designed for use on porous and some non-porous concrete substrates, such as garage and carport floors. It reinforces and penetrates the surface, thus promoting adhesion characteristics and providing a more compatible surface for the application of various latex and solvent-based floor coatings. For Interior & Exterior Use!

  • Garage & Carports
  • Patios
  • Balconies
  • Catwalks
  • Sidewalks
  • Driveways
  • Poured Concrete
  • Brick
  • Previously Painted Surfaces
  • Waterborne Epoxy Ester Formula
  • Excellent Surface Penetration
  • Applies To Non-Porous Surfaces
  • Seals Chalky Surfaces
  • Improves Adhesion Qualities
  • Eliminates Muriatic Acid Etching
  • Easy To Apply
#IP45-00 Stone Age Driveway Coating
IP-45-00

Stone Age Driveway Coating is a special 100% acrylic waterborne coating specifically designed for application to properly prepared driveways, floors and walkways. Its special formulation provides excellent hardness, durability, and weather resistance. Its smooth low sheen finish resists cracking, peeling and chipping, is mildew resistant, applies easily, and may be applied to previously painted surfaces. For Interior & Exterior Use! COLORS: White/Pastel, Midtone, Deeptone & Ultra-Deeptone Tint Bases, and 11 Stock Colors.

 

NOTE: This finish may become slippery when wet. The use of a non-skid additive, such as Infiniti’s Stone Age Non-Skid to ensure an anti-slip, and safe walking environment is recommended.

  • Driveways
  • Walkways
  • Stairways
  • Catwalks
  • Garage & Carport Floors
  • Patios
  • Pool Decks
  • Loading Docks
  • 100% Acrylic Formula
  • Excellent Hardness & Durability
  • Resists Fading
  • Resists Chipping & Peeling
  • Excellent Coverage
  • Excellent Product Versatility
  • Easy To Apply
#IP46-00 Stone Age Anti-Slip Acrylic Coating
IP-46-00

Stone Age Anti-Slip Floor Coating is a special 100% acrylic waterborne coating designed for application in areas where safety concerns are a priority. Its special formula provides an anti-slip texture finish that has excellent hardness and durability, which offers excellent wear and abrasion resistance in high foot traffic areas. Easy to apply, it has excellent coverage, resists cracking, chipping and peeling, is fade resistant, mildew resistant, and has excellent color retention.For Interior & Exterior Use! COLORS: White & 11 Stock Colors

  • Concrete Floors
  • Patios
  • Pool Decks
  • Walkways
  • Stairways
  • Loading Docks
  • Catwalks
  • Tennis Courts
  • Stadium Ramps
  • Masonry Walls
  • 100% Acrylic Formula
  • Excellent Durability
  • Excellent Wear & Abrasion Resistance
  • Excellent Coverage
  • Fade Resistance
  • Mildew Resistant
  • Product Versatility
  • Easy To Apply
#IPSG-6 Stone Age Non-Skid Paint Additive

Stone Age Non-Skid Paint Additive consists of state-of-the-art polyethylene granules specifically designed as a non-skid additive for all types of floor coatings. Its special formulation provides a more durable and safe non-skid surface for both interior and exterior floor surfaces. It will not alter the color and the overall performance of the product being used. Once added to the paint coating, these lightweight granules stay suspended much longer than traditional sand texture additives, and they don’t break-down as fast, thus offering better overall performance, durability, and product versatility. For Interior and Exterior use!

  • Patios
  • Stairways
  • Walkways
  • Pool Decks
  • Loading Ramps & Docks
  • Wood Decks
  • Balconies
  • Catwalks
  • Lightweight
  • Excellent Durability
  • Stays Suspended
  • Excellent Non-Skid Properties
Powered by Sigsiu.NET